top of page

NISSAN Z32 300ZX Composite Headlight Lenses

NISSAN Z32 300ZX Composite Headlight Lenses is another project that was simmering on my to-do list for quite a while. Just like Nissan released factory facelift parts (JDM 99Spec) at the end of 90s, I felt that there was a way to further freshen up the front end of Z32s (and Lamborghini Diablos) by using a modern, composite headlight lenses without fluting. After many trials and errors with different manufacturing approaches, I was able to produce a direct replacement lenses by using polycarbonate injection molding.

Some goals that I wanted to meet with this project:

o Manufacturing a direct replacement headlight lenses.

o Producing a lenses without fluting or alignment tool mounting points.

o Achieving a superior material clarity.

o Post processing the injection molded lenses according to industry standards with UV resistant coating.


-Direct replacement Nissan Z32 and Lamborghini Diablo headlight lenses.

-The lenses are manufactured via polycarbonate injection molding. This process yields high quality composite parts in a repeatable manner.

- New Polar Engineering lenses retain a ridge on a bottom flange surface and seamlessly snaps into a matching groove on a headlight housing.

-The lenses accept factory weather-stripping and mounting brackets.

-POLAR logo is molded into the upper section of each lens. It is not visible once lens is installed using factory weather strip and retaining brackets.

NOTE: four metal spring clips are no longer used during installation.


-One set of two lenses (left and right side).

-Installation and care tips


- USD350.00 plus shipping.

Disclaimer - For off-road use only.

Many Polar Engineering parts, including all ignition system altering products, are sold for off-road use only. All performance modifications and installations are at the customers own risk.

Polar Engineering or hold no responsibility either implied or otherwise for mechanical, electrical or other failure when using any aftermarket performance products. Items sold for off-road use only are illegal in many states and provinces and are intended for racing vehicles which may never be used on a public road.

By purchasing any aftermarket performance product, the customer takes full responsibility for any use, and/or misuse of the product and agrees that Polar Engineering or holds no responsibility for any consequences, legal, or other, of such use and/or misuse.


Recent Posts

See All


bottom of page